Choosing the Right Edge of Quartz Countertops for Multi-Family Kitchens - October 21, 2021

When it comes to remodeling a multi-family kitchen, an experienced quartz countertop fabricator will always keep an eye on even the minor details. Every detail counts. Not only it is important to choose between the different colors and vein patterns, but also it is important to consider what kind of edge of a quartz countertop will be right for the room. To make things easier, we are going to present a list of the best edges for quartz countertops suggested by quartz fabricators in Massachusetts. We will share the details of the different types of edges of quartz countertops so that you can choose the right one for the commercial rooms.

What are Your Options for Quartz Countertop Edges?  

According to the quartz fabricators, you have to remember that not all the countertop edges will look similar. Also, every countertop edge will not look good in all the commercial rooms. There are simpler cut-to-size countertop edges with minor details, while there are others that look more ‘flamboyant’ with intricate details. We have categorized the different edges of quartz countertops. Look through the list below to know the different types of edges of quartz countertops to know what are your options when you plan to remodel a multi-family home.

 The Standard Edges

As we already mentioned above, there are two different groups of countertop edges depending on the level of details. There are the standard edges that are simpler and they are the most common edges you will find on different commercial countertops everywhere.

  1. Straight Edge

The straight edge is a misnomer. The straight-edge countertops don’t ideally have straight edges. Instead, they are a bit rounded to reduce the risk of any injuries or damages to the surface as well. This is a great option if you are looking for something simple and low-key design that goes perfectly with any decor.

  1. Half Bevel

If you want to add a bit more pizzazz to the kitchen or bathroom countertops of hospitality areas without making it look too much, then choosing the bevel edge is the right option. The half-bevel edge comes with an angular edge on the top corners of the quartz countertops. Thus, quartz fabricators in Massachusetts prefer the half-bevel edges. It adds a subtle design that will look elegant and stylish but not too complicated to become a distraction. It will also add functionality to the quartz surface because it allows liquids to flow through the edges without causing any damage to the cabinets located below. Thus, it offers both form and function, especially for commercial spaces.

  1. Half Bullnose

The half bullnose offers a rounded right corner that is connected to a straight bottom corner. This smooth transition from a rounded to a straight edge makes the lower portion of the edge thicker. Just like the half bevel edge, it will also allow the water to run off the edge without causing any damage to the cabinets below.

  1. Full Bullnose

The full bullnose is one of the most common edges for multi-family quartz countertops. It is another popular choice for quartz fabricators in Austin. This type of edge has got a full curve on both the corners and offers a smooth corner all around. This is a timeless classic design that is perfect for a kitchen or the bathroom countertop.

  1. Quarter Round

The quarter round edge also comes with a round corner present on the top section of the edge. However, the difference is, unlike the half bullnose, the roundness of this edge is smaller. Thus, it looks similar to a pencil. This offers the countertop edge a sleek look along with a more traditional feel.

What are the premium countertop edges according to quartz fabricators in Austin?

When it comes to choosing the premium edges of the multi-family quartz countertops, they are much more elaborate and sophisticated designs that can help in gaining the attention of anyone in the room. Here is a list of the premium edges. Look through the list to know which one you like the best.

  1. Double Quarter Round

The double quarter-round edge looks similar to the pencil round edges present on both corners of the countertop. Thus, it gives a thinner look to the surface. A lot of quartz fabricators in Austin prefer that. As a designer, if you don’t like the complete curviness of the full bullnose, the double quarter is the best option.

  1. Double Bevel

The double bevel comes with angled edges present on both the top and lower edges of the quartz countertop. This will create a reflective surface that can catch the light. Thus, it creates a much bigger impact on the countertop.

  1. Ogee/Cove Dupont

The ogee edge is another very popular choice for quartz fabricators in North Carolina, especially when it is about the multi-family quartz countertops. The countertops that come with ogee edges have an S-shaped curve present on the edge which looks very elegant and goes perfectly with the traditional and modern kitchen designs as well.

  1. Double Ogee

The double ogee comes with two S-shaped curves located next to each other in succession on the countertop edges. The curves are shallower compared to the ogee. Thus, the countertops offer a much more luxurious feel.

  1. Dupont

The Dupont edge comprises a straight top corner along with a quarter circle present on the bottom corner. This is like a half bullnose along with a straight edge present on the top corner. This offers a nice edgier alternative to the ogee edges.

  1. Double Bullnose

This type of edge features two bullnose edges presents back-to-back in succession. Unlike the full bullnose that comes with a semicircular edge, the double bullnose combines two-quarter circles present on the top of each other. This is what creates a beautiful countertop edge for multi-family kitchens. A lot of quartz fabricators in North Carolina prefer the double bullnose because it goes well with all sorts of kitchen designs.

  1. Chiseled

The Chiseled edges have a much more rustic appeal. It changes the complete look and feel of the kitchen because it features an exposed and raw stone appearance. Thus, it looks very natural. There are jagged edges that look wild and it gives the appearance of a bit ‘rough around the edges’.

What are the factors to consider while choosing the edges for quartz countertops?

With so many options available, it can be a difficult choice to select the right edge for the quartz countertop for your kitchen. Yes, it comes down to your personal preferences, there are certain factors that will make things easier.

According to quartz fabricators in North Carolina, the first thing to consider is the amount of space you have in the kitchen. As a designer or a quartz fabricator, this is something that is very important. When there are smaller spaces, it is better to choose subtler edges because this will not draw too much attention from the decor. Choose the elaborate edges when space is bigger because it gives a feeling that everything is tied together.

The second factor to consider is the cabinets and the overall aesthetics of the room. The choice of your edge needs to go well with the decor. Do not compromise that. It should not supersede the overall look of the kitchen that you want your audience to see. Remember the countertop edge designs should add to the overall appeal of the kitchen decor.

The best way to choose the perfect edge for your quartz countertop is to work with professional quartz fabricators in Austin. They will come to the house where countertops will be installed. Once they visualize the space, they will offer the best countertop edge for the overall space. Impact Quartz is a professional manufacturer and installer of quartz countertops for multi-family kitchens and bathrooms. When you work with Impact Quartz, rest assured that you will choose the best and most suitable quartz countertop edges for your kitchen or bathroom space.

Leave a Reply

Your email address will not be published. Required fields are marked *


Are you ready to make an IMPACT?